Iggesund Tools


IT
  Please select your location:

Other visitors, please use European site.


 
02/27/2008
Iggesund, Sweden - The third external upgraded ScanChip, Iggesund Tools’ optical chip analyzer system, has been installed in Smurfit Kappa Kraftliner in northern Sweden. During the first year the ScanChip will analyze chips from the sampler after the softwood chipper. Later a belt conveyor will be installed to feed the ScanChip system with chips from the hardwood chipper.
 
12/28/2007
Iggesund, Sweden - Gällö Sawmill in Sweden has chosen Iggesund Tools to supply two pairs of PowerHeads with TurnKnife® System in their saw line. The installation was done in their Linck VM30 canters.

The Swedish sawmill Bergkvist Insjön has recently replaced one of their EWD Spiral disc canters with Iggesund Tools’ PowerHead. The new canter with 6 knife pockets has the Iggesund’s TurnKnife® System III technology. The sawmill has chosen PowerHead to get a better chip quality and a faster knife changing time.

Iggesund Tools’ upgraded optical chip analyzer system, ScanChip, has been installed in Billerud Gruvön Mill in Sweden. During the first time the ScanChip will be used as a laboratory analyzing equipment. Later the ScanChip system will be moved to an on-line position before the continuous softwood digester.

Pölky Sawmill in Finland has installed Iggesund Tools’ PowerHead with TurnKnife® System in their saw line. The installation was done in one of their ARI canters.
 
12/24/2007
Melbourne, Australia - Green Triangle Forest Products - Lakeside mill located in Mount Gambier, South Australia, has ordered 4 Iggesund Tools Powerhead canter heads for their primary and secondary canters. Installation is scheduled for march of 2008. This will be the second mill in Australia using Iggesund's Powerhead canters. The Weyerhaeuser mill located in Tumut, New South Wales has been operating Powerheads for 2 years now.
 
12/24/2007
Tauranga, New Zealand - Niagara Sawmilling, located in Invercargill, New Zealand has ordered an Iggesund Tools Powerhead for their head rig slabber. Installation I scheduled for January of 2008
 
12/24/2007
Tauranga, New Zealand - Red Stag Lumber located in Rotorua, New Zealand is upgrading to an 8 knife Powerhead on their Head Rig slabber. Increased Production is the reason for this upgrade.
 
12/24/2007
Melbourne, Australia - WAPRES-Bunbury, Western Australia recently started up the 2nd chipper at their export chip mill equipped with the Iggesund Turnknife System. Extended knife life, consistent chip quality and no knife grinding are just some of the benefits WAPRES has seen with using the Turnknife System.
 

 

Iggesund Tools is the world's leading supplier of knife systems for saw mill and pulp mill chipping as well as saw mill debarking.